Compatible Radar Scanners; Radar App Controls - Raymarine Lighthouse Sport 3.10 Series Advanced Operation Instructions

Note:
• Some features of the Radar app require your display to have both a GNSS (GPS) position fix and
compass heading data available, e.g.: to enable accurate display of AIS targets in relation to
your vessel and to report geographical positions (Latitude and Longitude) of the cursor position.
• Radar target tracking and Doppler features are not available in LightHouse™ Sport.
The Radar app allows you to configure a Guard Zone alarm which is triggered when an object is
located within the specified guard zone area.
The Range rings, the bearing ring and a VRM/EBL can be used to identify a target's range and
bearing in relation to your vessel.
AIS targets can also be displayed and tracked in the Radar app.

Compatible radar scanners

Element™ displays that include Wi-Fi can be connected wirelessly to the following radar scanners:
• Quantum™ Q24W (E70344)
• Quantum™ Q24C (E70210)
• Quantum™ 2 Doppler Q24D (E70498)
Note:
Element displays do not support tracking of radar targets or doppler features

Radar app controls

The Radar app has 2 control modes, motion mode and cursor mode. The behavior of some controls
are dependent upon control mode.
Motion mode
Motion mode is the default mode when the Radar app is opened. In motion mode the cursor is not
displayed onscreen.
Controls behavior:
• Pressing the OK button opens the sensitivity controls.
• Pressing any button on the Directional pad will switch to Cursor mode.
• Pressing the Waypoint button will place a waypoint at your vessel's current location.
134