Stihl FR 131 T Instruction Manual page 21

Removing the Mounting Hardware
2
3
4
5
1
Block the shaft (5) with the stop pin
N
(1).
Use the combination wrench (2) to
N
loosen and remove the nut (3)
clockwise (left-hand thread).
Take the rider plate (4) off the
N
shaft (5). Do not remove the thrust
plate (6).
Mounting the Cutting Attachment
WARNING
Risk of injury from thrown objects and
contact with the cutting attachment. Use
a deflector that matches the cutting
attachment – see "Mounting the
Deflector".
FR 131 T
Fitting Mowing Head with Screw
Mounting
Keep the instruction leaflet for the
mowing head in a safe place.
6
Fit the thrust plate (1).
N
Screw the mowing head (3)
N
counterclockwise on to the shaft (4)
as far as stop.
Block the shaft (4) with the stop pin
N
(2).
Tighten down the mowing head (3)
N
firmly.
NOTICE
Remove the tool used to block the shaft.
Remove the mowing head.
N
N
Mounting Metal Cutting Attachments
Keep the leaflet and packaging of the
metal cutting attachment in a safe place.
3
4
Wear protective gloves to reduce the
risk of direct contact with the sharp
1
cutting edges.
Mount only one metal cutting
attachment.
2
Block the shaft (4) with the stop pin
(2).
Unscrew and remove the mowing
head (3) clockwise.
WARNING
English
19