Cleaning, Care And Maintenance - Buffalo Bistro DY993 Instruction Manual

Contact grill
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Cleaning, Care & Maintenance
Before starting to clean the Grill, disconnect from the electricity supply by removing the plug from the
socket.
Clean the cooking surface regularly. We recommend it is cleaned after every use session.
When the cooking surfaces are still warm, wash with warm soapy water and then rinse thoroughly with
clean water. This will help to stop food sticking to the plates. Remove the fat drip tray and wash in warm
soapy water.
Other surfaces can be wiped over with a damp cloth to remove all food residues. Do not immerse the
Contact Grill in water or use water sprays to clean it.
If grease is permitted to accumulate, it will begin to carbonise into a hard substance that is extremely
difficult to remove. To prevent this, follow the cleaning steps below:
Always turn OFF the appliance and disconnect from the power supply before cleaning.
Allow the appliance to cool before cleaning, but for best results clean the plates when they are still
slightly warm.
Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
Take care when using scrapers to remove cooking residues as they can damage the cooking surface.
Dry thoroughly after cleaning.
A BUFFALO dealer or qualified technician should carry out repairs if required.
Scraping
After each use, scrape the appliance with a scraper/grill stone/copper brush or flexible spatula to
remove excess fat and food. A waste tray is provided for the scrapings if necessary
If there is an accumulation of burned fat or food, the cooking surface should be thoroughly scoured
and re-seasoned.
Note: It is vital that the cooking surface is re-seasoned after scouring.
Warning: Do not use steel wool as it may leave shards that could Contaminate
food.
Waste tray
This appliance features a waste tray to collect any liquid or fats that run off during cooking
At least once a day, remove and empty the waste tray before washing with warm, soapy water.
Do not allow the tray to overfill, or excess grease will run out of the overflow hole at the front of the
tray.
Warning: Do not remove tray during or immediately after use as the contents
will be hot.
DY993-DY998_ML_A5_v2 20200320.indb 5
UK
5
2020/3/20 16:05

Advertisement

Table of Contents
loading

Table of Contents