Fitting/Removing The Protective Cap; Cordless Shaving - Silvercrest SRR 3.7 C3 Operating Instructions Manual

Fitting/removing the protective cap

♦ When you are not using the shaver, protect the shaving head by
putting on the protective cap
♦ Remove the protective cap
cutting unit

Cordless shaving

CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
This shaver can be used without the power cable. In this case, you
must charge the appliance before first use (see section "Charging
the battery").
1) Ensure the cutting unit
2) Remove the protective cap
3) Press the On/Off switch
The blue control lamp
│ GB │ MT
■ 76
.
is attached and locked in place.
.
by pulling it downwards off the
.
to switch on the appliance.
lights up.
SRR 3.7 C3