Assembling The Carburettor - Husqvarna 525BX Workshop Manual

Repair instructions

7.16 Assembling the carburettor

• Blow all channels in the carburettor compart-
ment clean
• Mount a new plug (A).
Use a suitable punch to get a completely tight
seal (B).
• Press in a new main nozzle(B).
• Set the groove on the main nozzle (B)
to be 45° against carburettor body.
• Mount the valves and dampers.
Tip!
Any numbers on the valves should be able to be
read from the outside.
Replace the fuel screen if it is damaged or cannot
be cleaned.
Place the pump diaphragm closest to the
carburettor housing. Then the gasket and cover
and the other components in reverse order of
removal.
40
- English
B
45°
Groove
A