Manage The Hubs Using The Anywhereusb Manager - Digi AnywhereUSB Plus Series User Manual

Manage the Hubs using the AnywhereUSB Manager

You can use the AnywhereUSB Manager to view the AnywhereUSB Plus Hubs that are allowed to
connect to your computer. You can also connect to groups of USB ports on the Hubs.
By default, the AnywhereUSB Manager is configured to automatically discover Hubs that are
connected to the same network as your computer. You can
are not on the same network.
Note Before you begin, make sure you have
Start the AnywhereUSB Manager
Rename AnywhereUSB® Plus Hubs, groups, and USB devices
Disconnect from a group or USB device
Configure auto connect
Manage the list of known Hubs
Minimize the AnywhereUSB Manager when launched
Autofind Hubs when the AnywhereUSB Manager launches
Specify search, response, and keepalive intervals for a Hub
View latency graph
View the AnywhereUSB Manager system messages
View AnywhereUSB® Plus license information
Restore AnywhereUSB Manager default configuration
Access the online help from the AnywhereUSB Manager
AnywhereUSB Manager window
Exit the AnywhereUSB Manager
AnywhereUSB® Plus User Guide
allow a connection
installed the AnywhereUSB Manager.
to additional Hubs that
29
29
30
31
32
33
34
34
35
35
35
36
36
36
43
28