Supermicro X11DAi-N User Manual page 14

X11DAi-N User's Manual
Peripheral Devices
•
Four (4) USB 3.0 ports on the rear I/O panel (USB 0-4)
•
Two (2) USB 3.1 ports on the rear I/O panel (USB 9/10)
•
Two (2) onboard USB 3.0 ports (USB 5/6) for front access
•
One (1) Type A USB 3.0 connector (USB 7) for front access
BIOS
•
32 MB SPI AMI BIOS SM Flash UEFI BIOS
®
•
ACPI 3.0/4.0, USB keyboard, Plug-and-Play (PnP), SPI dual/quad speed support, riser-card auto detection support, and
SMBIOS 2.7 or later
Power Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel® Intelligent Power Node Manager 4.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used)
•
Management Engine (ME)
System Health Monitoring
•
Onboard voltage monitoring for +3.3V, 3.3V standby, +5V, +5V standby, +12V, CPU core, memory, chipset, BMC, PCH
•
CPU System LED and control
•
CPU Thermal Trip support
•
Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to 205W (See Note 1 on next page.)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual cooling zone
•
Multi fan speed control support via onboard BMC
•
Pulse Width Modulation (PWM) fan control
System Management
•
Trusted Platform Module (TPM) support
•
PECI (Platform Environment Control Interface) 2.0 support
•
System resource alert via SuperDoctor® 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis intrusion header and detection (Note: please connect a cable from the Chassis Intrusion header at JL1 to the
chassis to receive an alert via IPMI.)
LED Indicators
•
CPU/Overheating
•
Fan Failure
•
LAN activity.
Dimensions
•
12" (L) x 13" (W) (304.8 mm x 330.2 mm)
Motherboard Features
14