Hilti TE 50-AVR Original Operating Instructions page 27

• This product is not suitable for working in a damp environment.
3.5 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which
reduces vibration noticeably.
3.6 Quick-release chuck (accessory)
The quick-release chuck makes it possible to change accessory tools
quickly, without need for a chuck key (keyless system). It is suitable for
accessory tools with a cylindrical or hexagonal shank, such as drill bits for
wood and metal, or mixing paddles, which are used in the rotary-only mode
(without hammering action)
3.7 Service indicator
The product has an LED service indicator.
Status
Service indicator shows
Service indicator flashes
3.8 Items supplied
Combihammer, side handle, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or online at: www.hilti.group / www.hilti.com.
4 Technical data
4.1 Combihammer
Note
For rated voltage, rated current, frequency and/or input power, refer to
the country-specific type identification plate.
If the device is powered by a generator or transformer, the generator or
transformer's power output must be at least twice the rated input power
shown on the rating plate of the device. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated
voltage of the device.
Weight in accordance with EPTA procedure 01
Ø hammer drill bits
Printed: 15.09.2017 | Doc-Nr: PUB / 5283607 / 000 / 02
.
Meaning
• Servicing is due.
• The product is faulty. Have the
combihammer repaired by Hilti
Service.
TE 50­AVR
6.1 kg
12 mm ...32 mm
English 21