Table of Contents
Advertisement
1-5. Installation Space
1-5. Installation Space
When installing, the installation space must be secured in
consideration of the ventilation and service operation.
The air flows of this unit are shown below. Do not block
the exhaust part and ventilation of front and side panels so
that the air flows enough.
Moreover, when this unit is installed without rack mount-
ing, it is recommended that the clearance at the upper, left
and right sides is at least 4 cm.
n
If the ventilation is not enough, the unit may be damaged
because an increase of the internal temperature of the unit
can not reduce.
Mass: 23 kg
427
Air flows
Rear side
Front side
DISK UNIT
BKNW-116
POWER
BUSY
WARM-UP ALARM
(1234)
When pulling out rack mount
Unit: mm
1-3 (E)
BKNW-116
Advertisement
Table of Contents
