Appendix B.6.2. Edit The Certificate Loaded Onto The Fieldserver; Figure 25: Fs-Gui Security Setup - Certificate Loaded - SMC Sierra Monitor FieldServer QuickServer FS-QS-2 0 Series Manual

Appendix B.6.2. Edit the Certificate Loaded onto the FieldServer

NOTE: A loaded certificate will only be available if the security mode was previously setup as
HTTPS with own trusted TLS certificate.
•
Click Security in the Navigation panel.
•
Click the Edit Certificate button to open the certificate and key fields.
•
Edit the loaded certificate or key text as needed.
•
Click Save.
Figure 25: FS-GUI Security Setup – Certificate Loaded
Page 34 of 43
QuickServer Start-Up Guide