Select The Security Mode; Figure 13: Security Mode Selection Screen - SMC Sierra Monitor FieldServer QuickServer FS-QS-2 0 Series Manual

QuickServer Start-Up Guide
6.2

Select the Security Mode

On the first login to the FieldServer, the following screen will appear that allows the user to select which
mode the FieldServer should use.

Figure 13: Security Mode Selection Screen

NOTE: Cookies are used for authentication.
Appendix B.6.
NOTE: To change the web server security mode after initial setup, go to
The sections that follow include instructions for assigning the different security modes.
Page 15 of 43