Weber Summit 92774 Operating Manual page 15

MAINTENANCE
9. Slide the burner assembly from each Heat Zone. The
left and right burners are connected by the Crossover
tube. Figure 13 (a).
(a)
Crossover tube
10. Lift and twist the burner assembly slightly to separate
the crossover tube from the burners. Remove the
burners from the cooking box. Figure 14.
Pull out of here
Figure 13
Separate here
Crossover tube
Figure 14
11. To reinstall the burners, reverse steps 3 through 10.
CAUTION: The burner openings must be positioned
properly over the valve orifices. Figure 15(a).
Check proper assembly before fastening manifold in
place. Figure 15 (b).
(a)
Burner
Orifice
15
Valve
(b)
Figure 15