Bosch PAM 220 Original Instructions Manual page 31

OBJ_BUCH-2116-002.book Page 31 Monday, February 24, 2014 10:56 AM
To measure the corner angle, place the fold-out and base legs flat against
the walls or set a known corner angle on the measuring tool.
Press button 7 again to store the measured corner angle for the compound
mitre. "CNR" and the current angle will appear on the display.
"3. MTR": Calculating the Mitre Angle
Press button 7 again. "MTR" and the calculated mitre angle for the chop
and mitre saw are indicated on the display.
The horizontal mitre angle defines the rotation of the saw table (MTR).
"4. BVL": Calculating the Bevel Angle
Press button 7 again. "BVL" and the calculated bevel angle for the chop
and mitre saw is indicated on the display.
The bevel angle defines the incline of the saw table (BVL).
Bosch Power Tools
MTR MTR
BVL BVL
English | 31
1 609 92A 0GC | (24.2.14)