English - Bosch PAM 220 Original Instructions Manual

OBJ_BUCH-2116-002.book Page 22 Monday, February 24, 2014 10:56 AM

22 | English

English
Safety Notes
Read and observe all instructions. SAVE THESE
INSTRUCTIONS FOR FUTURE REFERENCE.
 Have the measuring tool repaired only through qualified specialists
using original spare parts. This ensures that the safety of the measur-
ing tool is maintained.
 Do not operate the measuring tool in explosive environments, such
as in the presence of flammable liquids, gases or dusts. Sparks can
be created in the measuring tool which may ignite the dust or fumes.
 When using the angle information provided by this tool to cut work-
pieces, always strictly observe the safety and working instructions
of the saw being used, including those for positioning and clamping
the workpiece. When the required angles can not be set on a certain
saw or saw type, alternative sawing methods will need to be applied. Ex-
tremely acute (sharp) angles can be cut using a taper jig with a table saw
or a circular saw.
Product Description and Specifications
Intended Use
The measuring tool is intended for measuring and transferring angles,
calculating simple and compound mitre angles, and checking and aligning
horizontals and verticals.
Product Features
The numbering of the product features shown refers to the illustration of
the measuring tool on the graphic page.
1 Fold-out leg
2 Leg extension
3 Base leg
1 609 92A 0GC | (24.2.14) Bosch Power Tools