Optional Extras - Vent-Axia HR100R Installation And Servicing Instructions

Speed Control Switch
Ref: VCON100
White plastic single gang switch for ON/OFF
control and NORMAL/BOOST speed control of
HR100R unit.
Speed Control Switch
Ref: NBSW
White plastic single gang switch for
NORMAL/BOOST speed control of HR100R unit.
A metal black box for flushing mounting
(Ref: MBB) and plastic back box for surface
mounting (Ref: PBB) are available for use with
the above controllers.
Pullcord Control Switch
Ref: PCSW
2 way ceiling mounted switch for
NORMAL/BOOST speed control of HR100R unit.
A second PCSW can also be used for ON/OFF
control.
Humidity Sensor
Ref: HS6
Electronic humidity sensor with changeover
relay output and adjustable switching point from
60% to 100% RH. In built temperature
compensation (night time setback).
Contamination protection sensor.
Timer
Ref: TIM2
Remote mounting timer box to provide ON/OFF
control or switching between the 2 speeds on
operation of switched live. Over-run period
adjustable 2-30 minutes.
Internal Extract/Supply Grille
Ref: ESG100
White plastic louvre grille designed to fit in the
wall or ceiling and serves both extract and
supply functions. 100mm diameter spigot
connection.
Internal Extract Valve
Ref: EV100
Adjustable extract valve with 80mm long,
100mm diameter spigot connection. Moulded in
white plastic, the EV100 valve is suitable for
both ceiling and wall mounting and is 150mm
diameter overall.

7.0 Optional Extras

7.1 Ancillary Equipment
Internal Supply Valve
Ref: SV100
Adjustable supply valve with 80mm long,
100mm diameter spigot connection. Valve
design ensures horizontal discharge of air for
optimum diffusion. Moulded in white plastic, the
EV100 valve is suitable for both ceiling and wall
mounting and is 150mm diameter overall.
Filter
Ref: F100
Coarse in-line filter complete with reticulated
foam element. Compatible with 100mm
diameter ducting.
External Push-Fit Wall Vent
Ref: WC1
400mm long brown plastic duct and external
grille with vaned rubber seal for push fit
installation in external walls. Fits into pre-drilled
hole of 115mm diameter.
External Dual Wall Vent
Ref: WC2
Combined supply and extract terminal with grey
plastic external cowl, with 100mm diameter
ducting. This vent is ideal for exposed
installations.
External Louvre Wall Box
Ref: WL100
Anodized aluminium external weather louvre
with metal wall box 130 x 130mm and 174 x
174mm grille. 100mm diameter spigot
connection.
Ventilating Roof Tiles
Ref: VT100
Moulded ventilation terminal tiles, available in a
range of sizes, profiles and colours. 100mm
diameter spigot connection.
In-Line Heater
Ref: ILH100
Compatible with 100mm ducting, the ILH100
provides a boost heat facility when required.
Flexible Ducting
Ref: AFD100
Aluminium ducting in 10m lengths.
Ref: ACD100
Acoustically insulated ducting in 6m lengths.
Ref: IFD100
Thermally insulated ducting in 6m lengths.
Ref: PFD100
PVC ducting in 6m lengths.
Quicktube 100mm rigid plastic ducting can also
be used in conjunction with the HR100R unit. For
details please see data sheet.
13