Intended Use; Package Contents - VOLTCRAFT V-CHARGE 600 DUO Operating Instructions Manual

3. Intended use

The product is used to charge up to two battery packs on two charging terminals. A balancer can be used for even
charging of the individual cells in the battery pack. The adjustable charging currents are in a range of 0.1 - 16 A, which
means that Li-HV battery charging is also supported. Li-Po/Li-HV/Li-ion/Li-Fe 1-6S, Ni-Cd/Ni-MH batteries 1-16S
as well as lead batteries 1-12 S can be charged directly at the designated connections. It is possible to connect an
external temperature sensor to monitor the battery Battery discharging is carried out with up to 8 W discharging power.
When using an external discharge device, a 200 W discharging power is possible for rapid discharge.
In addition, the product is also suitable for inductive (wireless) charging of batteries in compatible smartphones with Qi
technology and other mobile devices. A USB connection can be used for cable charging of smartphones.
Testing of the angle of rotation of servo motors as well as determining the engine speed according to the pulse width
are also integrated into the charger as test functions.
The setting, monitoring and control of the functions are made easier thanks to a clear LC display. Basic safety features
such as short-circuit protection at the output as well overheat protection are also integrated into the product.
The voltage/power supply of the charger can also be used with various AC voltages or DC voltages (see 'Technical
data'). The power cable supplied can be used with mains AC voltage. Connection to a battery as a power supply for
outdoor activities in dry environments is also supported (see the information in Section 9. Operation, b) Connection to
the power supply). The requisite cable is not included with this product.
This product is intended for indoor use only. Do not use it outdoors in damp conditions. Contact with moisture (e.g. in
a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes other than
those described above may damage the product. In addition, improper use can cause hazards such as a short circuit,
fire or electric shock. Read the operating instructions carefully and store them in a safe place. Only make this product
available to third parties together with its operating instructions.
All company and product names are trademarks of their respective owners. All rights reserved.

4. Package contents

• Charger
• CD with operating instructions
• Mains cable
• Safety information
Up-to-date operating instructions
1
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
19