Siemens SINAMICS G120 Application Description page 23

4 Configuration and Project Engineering
4.1 Creating the project configuration
No. Action
17. Select the desired HMI
operator panel:
1. In the "Devices &
networks" editor, go to
the "Network view".
2. Then use drag and drop
to move the required
KTP600 from the catalog
to the graphic area.
In the catalog, the KTP600
can be found in ...
>HMI
>SIMATIC Basic Panel
>6" Display
18. Connect the HMI operator
panel to the SIMATIC
controller:
1. Activate connection
mode and from the drop-
down list, select "HMI
connection".
2. Drag the mouse to create
a graphic connection
between the Ethernet
ports of the KTP600 and
the SIMATIC PLC.
SINAMICS G120 as a Speed Axis on the S7-1500
V1.0a, Entry ID: 78788716
Inserting and networking the KTP600
The screenshot shows the SINAMICS G120 with PROFINET
Picture
1
2
2
1
23