Siemens SIMATIC S7-1500 Function Manual page 89

Alarms
6.5 Example program for program alarms
Edit alarm text
To edit the alarm text, follow these steps:
1. Double-click "PLC supervisions & alarms" in the project tree. Select the "Alarms" tab. The
alarm editor opens.
2. Select the type alarm for the maximum fill level.
3. Enter the alarm text for the maximum fill level in the "Alarm text" column.
4. Select the type alarm for the minimum fill level.
5. Enter the alarm text for the minimum fill level in the "Alarm text" column.
Figure 6-10 Edit alarm text
Result: You have created the alarm texts for both type alarms.
Additional information
You can learn how to create multilingual texts under "Multilingual alarms" in the section
Editing alarms in the alarm editor (Page 78).
88
Function Manual, 11/2019, A5E03735838-AF
Diagnostics