Page 3
This instruction manual contains important information Actuator Series Approximate Weight Lb. (kg) regarding the installation, operation and troubleshooting QPX1 23 (10) of Jamesbury® Quadra-Powr X Spring-Diaphragm Actua QPX2 42 (19) tors. This unique spring-diaphragm actuator designed for QPX3 72 (33)
Page 4
(15) on the spring housing (32) and MAINTENANCE line up all the holes. Before working on a Quadra-Powr X actuator, note that all 5. Insert hex head screws (27) in all holes. Do not force the fasteners except socket head shoulder screw (8) and hex hex head screws through the diaphragm.
Page 5
IMO-215EN 5. Slowly relieve the air pressure in the actuator. The clevis tridge into the spring housing (32). Make sure that the (7) should be set against the spring retainer (30), and spring package is not resting on the hex head cap positioned symmetrically about the slot in the spring screws (38) which hold the spring housing and body housing.
Page 7
Hex Head Cap Screw Diaphragm Washer *MALE ACTUATORS ONLY. **FEMALE ACTUATORS ONLY. REPAIR KITS/SPARE PARTS ACCESSORIES Quadra-Powr X actuators can be locked in the spring SERVICE KITS uncompressed mode. Refer to IMO-30 for more information. Model Complete Diaphragm QPX1 Actuator...
Page 8
Figure 5 Subject to change without prior notice. Metso Automation Inc. Europe, Vanha Porvoontie 229, P.O. Box 304, FI-01301 Vantaa, Finland, Tel. +358 20 483 150, fax +358 20 483 151 North America, 44 Bowditch Drive, P.O. Box 8044, Shrewsbury, Massachusetts, 01545-8044, USA, Tel. +1 508 852 0200, fax +1 508 852 8172 South America, Av.
Need help?
Do you have a question about the Quadra-Powr X and is the answer not in the manual?
Questions and answers