Table of Contents
Advertisement
Value Window Bu
Value windows display the value of a control and allow click-and-drag adjustment, or direct control
via the keyboard.
•
Using the mouse, click-and-drag on the value
left/right, some up/down (as you hover over a button
direction of movement that button supports).
•
Using the arrow keys, click once with mouse to select the button, and
left/right (depending on the direction supported by that button) to move in the smallest
incremental steps across the bu
through the range).
•
Using key entry, double click on the button to open the value window, and directly enter the
value from your keyboard. If you enter an out of range number, the button stays selected but
remains at the current setting (system beeps? If system sounds are on?)
Some processors have link buttons between a pair of value windows, allowing click-and
adjustment while retaining the offset between the controls.
Faders
C
lick on the fader itself or anywhere within the fa
displayed in a window above the slider path. When pairs of faders are provided for stereo c
(s
uch as in the Q10) click-and-drag between the faders will adjust both faders together (maintaining any
offset between them if there is some)
Band Markers
B
an m
d
arkers appear on all Waves graphic displays, and have many func
•
Click-vertical drag
•
Click-horizontal drag
•
Click- diagonal drag
•
Control-clic
axis – vertica
l drag will lock frequency but allow gain change, and horizontal drag will lock gain
but allow frequency change.
•
Alt-click
(PC)/
•
Shift-click
to select multiple band markers for simultaneous control, and shift-click again on
any marker you wish to de-select.
•
Double click
•
Drag
on any de-activated band marker to re-activate
•
Option/Command-click
ttons
tton's range (holding down the arrow keys will move faster
changes gain.
changes frequency.
will adjust gain and frequency together.
k
Command-click
(PC)/
Option-click
(Mac)
Command-click
(PC) /
(Mac only, not supported on PC) to change filter type.
window to adjust. Some value windows support
, arrows will appear to let you know which
der track. The numerical value of the slider settings is
and drag
(Mac)
constrains movement to the X or Y
and horizontal drag
(Mac) on any band marker to toggle in or out.
it.
L3-LL User Manual
then use up/down –
tions:
allows Q adjustment.
-drag
ontrols
22
Advertisement
Table of Contents
