Main Display - Waves Multimaximizer L3-LL User Manual

Main Display

Gain Frequency
Curve Band Marker
The Gain/Frequency graph displays the peak attenuation across the frequency range.
The top purple line is the applied Gain curve.
The orange line is the Dynamic Gain line and shows Gain changes as they happen.
The semi-transparent purple shade displays a smoothed trail of the Dynamic Gain line.
The lower gray line is the Dynamic Gain peak hold which displays the maximum attenuation
across the frequency spectrum.
The graph also includes 5 mark
m oved up or down, adjust the linked Gain and Priority.
The graph also has 4 line markers that display and allow adjustment of the crossover frequencies.
C lick-vertical drag the band markers changes gain and priority
Click-horizontal drag the band markers changes frequency bandwidth
Control-click (PC)/Command-click (Mac) and drag constrains movement to the X o
axis – vertical drag will lock frequency but allow gain change, and horizontal drag will
lock gain but allow frequency change
Alt-click (PC)/Option-click (Mac) and horizontal drag allows Q adjustment, and
disables the vertical axis while held
Double click on any band marker to toggle in or out
Shift-click to select multiple band markers for simultaneous control; shift-click again on
any marker you wish to de-select
Crossover Peak Attenuation
Cutoff Marker Hold Curve
ers which, when moved left or right, adjust the bands' width, and when
L3-LL User Manual
Attenuation Dynamic Gain Line
Range Momentary Attenuation
r Y
14