Table of Contents
Advertisement
Gain
- Range -12dB to +1
2dB
-
Default 0dB
Gain controls the overall gain of each frequency band. To boost the gain of a given range without over-
limiting it, raise both Priority and Gain.
Gain/Priority Link
The
button allows simultaneous control of Gain and Priority, retaining a constant offset between
them.
Priority
- Range -12dB to +12dB
- Default 0dB
P
riority adjusts the relative limiting, or relative attenuation distribution, across the bands. Raising
P
riority applies less attenuation to the respective bands (in relation to other bands) while maintaining
the same over
all limiting; lowering Priority results in more attenuation applied to the respective bands.
It's important to rem
ember that Priority settings are RELATIVE between bands. This means that if all
bands are set t
o the same non-zero priority, it has the same effect as setting all priorities to 0.
Priority Indicators
- Range -12dB to +12dB
- Default 0dB
The
displays the applied priority for the frequency band.
Per Band Release
- Range 0.1 to 2500.
The per band Release sets the reference Release time for each band. This reference
be further adjusted by the Master Release Behavior type.
Master Release Link
The
button allows relative release adjustment for all bands.
L3-LL User Manual
release time can
16
Advertisement
Table of Contents
