❼
Time display
Current elapsed recording/playback time
❽
Progress bar
This shows the current playback location.
Slide ▼ to change the playback position.
❾
Remaining battery charge
This shows the remaining battery charge. When the remaining battery charge becomes low, replace the bat-
teries ( →
"Using batteries" on page
❿
Headphone/speaker volume button
Touch this to show the headphone/speaker volume slider. ( →
⓫
Track display switching button
This changes the tracks shown
⓬
Settings button
Press to access a list of projects on the SD card ( →
⓭
Low/Mid/High equalization
These can be used to boost and cut the equalization of low, mid and high frequencies.
⓮
Track Setting button
Press to make track settings, including Lo Cut and Phantom functions. ( →
⓯
EFFECT settings button
Insert effects can be used. ( →
⓰
Effect Send
Use this to adjust the level sent to the send effect.
⓱
Pan
Use this to adjust the left-right balance.
16) or connect an AC adapter ( →
page
"Using effects" on page
57
"Using an AC adapter" on page
page
40)
99) and to create new projects ( →
page
64)
16).
page
58).
27)