Zoom H8 Operation Manual page 46

2.
Set the recording format
The following formats can be set.
They are shown in order of audio quality (from low to high) and file size (from small to large).
Setting
MP3 128 kbps
MP3 192 kbps
MP3 320 kbps
WAV 44.1 kHz/16 bit
WAV 44.1 kHz/24 bit
WAV 48 kHz/16 bit
WAV 48 kHz/24 bit
WAV 96 kHz/16 bit
WAV 96 kHz/24 bit
Recording
1.
Press on the FIELD app screen.
This starts recording.
2.
Press to pause.
NOTE
• When recording is paused, a mark is added at that point. Press
• A maximum of 99 marks can be added in a project.
HINT
Marks can be added without pausing. ( →
3.
Press to stop.
NOTE
If the file size exceeds 2 GB during recording, a new file will be created automatically in the same project and
recording will continue without pause. When this happens, numbers will be added to the ends of the file names:
"_0001" for the first file, "_0002" for the second file and so on. No gap in sound will occur between the two files
when this happens.
Explanation
The sampling frequency is 44.1 kHz.
The higher the bit rate is, the better the audio quality will be.
The higher the sampling frequency (kHz) and bit rate (bit) are, the
better the audio quality will be.
"Setting how marks are added when recording/playing" on page
46
again to resume recording.
124)