Advertisement
INSTALLATION
Antenna
1.
Remove the sleeve, spacer washer, lock washer and nut
from the antenna.
2.
Pass the antenna cable through the antenna mounting
hole.
3.
Secure the antenna to the mount using the sleeve, spacer
washer, lock washer and nut. Tighten securely.
Antenna Cable
1.
Pass the antenna cable through the radiator grille opening
in the location as shown.
2.
Route the antenna cable through the radiator support
panel, under the A/C tubes into the engine bay as shown.
UH9000S / UH9060S / UH9080S
Page 6 of 12
Fitting Instructions
Advertisement
