Leckey Freestander User Manual page 16

Hide thumbs Also See for Freestander:
Table of Contents

Advertisement

Available languages

Available languages

Transferring the user into
and out of the stander
Before transferring the child into the stander
carry out the daily product inspection as
outlined in section 11 of this user manual.
Before transferring the child into the
product lock all the castors, ensuring that
they are facing outwards to maximise
product stability. Make sure the straps
on the chest, hip support harnesses and
sandals are released and out of the way
to facilitate transfer.
Always secure the pelvic band and safety
strap first then the chest strap and the
users feet.
Adjusting the Flexible
Laterals
The Freestander flexible lateral supports
can be adjusted in and out by loosening
the bolts (a) on the back of the chest plate.
Once these bolts have been loosened, the
flexible lateral supports can be adjusted to
the required position and once in position the
bolts should be re-tightened securely.
The flexible laterals also have a small
amount of height adjustment. To alter the
height loosen the allen bolts (b), position the
lateral as required and then re-tighten the
allen bolts (b) securely. The flexible lateral
supports are secured around the user by
tightening the safety strap into position.
Fasten the safety strap immediately.
Always use caution to ensure fingers do
not become trapped when adjusting the
lateral supports.
b

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Lfs/1Lfs/2Lfs/3

Table of Contents