Watlow Ramping and Profiling Microprocessor-Based Control SERIES 1500 User Manual page 14

Starting Out
Figure 8 -
Change Data (CHG
DATA) Mode
Overview
14
WATLOW Series 1500 User's Manual
Change Data Mode (CHG DATA):
Three Step Types for Entering Program Data
Set Point (SP):
a simple,
regular profile
step.
Set Point Step,
Program:
This Step#
is an SP
step.
Set Point
for Ch-1.
Set Point
for Ch-2.
Auxiliary
(Event)
Outputs,
ON/OFF.
Step
Duration.
Go to any
next step.
Jump Loop (JL):
a means for
jumping to
a step out of
numerical
sequence.
Jump Loop Step,
Program:
This Step#
is a JL
step.
Jump to
Step# __.
Repeat that
step, __
times (Jump
Counts).
Go to any
next step.
Wait for...(WT):
a means to
wait for a
particular
condition or
time.
Wait for Step,
Program:
This Step#
is a WT
step.
Wait for
this Ch-1
value to
occur, __.
Wait for
this Ch-2
value to
occur, __.
Wait for
Input Event
to achieve a
specified
conditon.
Wait for
this real
time, ___.
Go to any
next step.
Starting Out, Chapter 1