Craftsman CMHT77636 Manual page 2

surface. Use caution when drilling, nailing or cutting into walls, floors and ceilings
which may contain electrical wiring or pipes. These items may be detected by the
sensor in the same manner in which studs are detected. Because studs are normally
spaced 16 inches (406 mm) or 24 inches (610 mm) apart and are usually 1-1/2
inches (38 mm) wide, beware of anything closer together or of a different width.
Always turn off the power when working near electrical wires.
0
• Avoid exposure-Laser
radiation emitted from
this aperture .
.....
_
...
·-· - -· - --
·-··--··-
·---- - -
_-.:. • .;.-:::.:
___ l ~ I
~
I
CRAFTSMAN.,
e
FEATURES
A.)
Laser O n/O ff Button
B.) D etecto r O n /Off Button
C .) AC Wire Indicator LED
D .) LC D Screen
E.)
Wall Attachment - Hanging
C one (keyhole)
F .) Wall Attachment - Drywall Pin
G .) Self-Leveling Laser Lines
H .) Battery C ompartment
C over (back side of unit)
0