Removing Tree From The Christmas Tree Stand; Switching On Led Lights - Westfalia Christmaxx Instruction Manual

Removing Tree from the Christmas Tree Stand

1. Hold the Christmas tree fi rmly.
2. Remove the locking pin from its holder.
Risk of injury due to releasing retention clips! Keep hands, fi ngers and other body
parts away from the retention clips, when pulling the tree out of the stand.
6. Get rid of the rest of the water from the water reservoir.

Switching on LED Lights

1. Point the remote control towards the Christmas tree stand.
2. Press the On/Off button once to switch on the LED lights.
3. If you want to switch off the LED lights, point the remote control towards the Christmas
tree stand again and press the On/Off button once.
3. Loosen the locking element by turning it clockwise up to its
limit stop. You can turn the locking element by using your
your foot or your hand.
4. The retention clips will now no longer be fi xated by the
locking element. Pull the tree out.
5. The retention clips are released and open up when the tree
is pulled out of the stand (see picture).
22