Mode Of Operation - Westfalia Christmaxx Instruction Manual

Led christmas tree stand
Table of Contents

Advertisement

Available languages

Available languages

Mode of Operation

CAUTION!
❐ Make sure that the locking pin is inserted when the locking element has been moved to
the holding position. The tree is not stable if the locking pin has not been inserted!
❐ Risk of injury due to releasing retention clips! By pulling the tree out of the stand, the
retention clips are released and open up suddenly. Keep hands, fi ngers and other body
parts away from the retention clips, when pulling the tree out of the stand.
❐ Do not overfi ll the water reservoir! Fill a maximum of 500-600 ml of water into the
water reservoir.
❐ The Christmas tree stand is suitable for coniferous trees with a maximum height of
2.10 m and trunk diameters of 4-10 cm. With trees that have larger or smaller trunk
diameters, it is not possible to guarantee secure stability of the tree.
❐ The Christmas tree stand is suitable for putting up coniferous trees with a trunk diam-
eter of 4-10 cm. Do not attempt to put up trees with a trunk diameter of larger than
10 cm using the article; this may cause damage to the article.
❐ Make sure before putting up the Christmas tree that the fi rst 20-30 cm of the tree
trunk are free of any branches so that you can put it up without any problems!
❐ Put up the Christmas tree in such a way that it is not in the way or cannot accidentally be
knocked over.
❐ Danger of fi re! Do not place the article close to sources of heat, such as hobs or ovens!
Both the Christmas tree stand and the erected tree may be damaged by the heat or be
set on fi re!
❐ Keep children and animals away from the article! Make sure that children and animals do
not pull on the tree or knock it over.
20

Advertisement

Chapters

Table of Contents
loading

Table of Contents