Putting Up The Tree - Westfalia Christmaxx Instruction Manual

Led christmas tree stand
Table of Contents

Advertisement

Available languages

Available languages

Putting Up the Tree

If necessary, get help from a second person in putting up the tree or removing the
tree from the stand!
To be able to put up your Christmas tree, the locking element must be in the closed holding
position. This means that the retention clips are upright and the locking element is secured
with the locking pin.
The locking pin is located between the locking element and the housing of the LED lights
(see picture).
3. Pour some water into the water reservoir so that your Christmas tree remains fresh for
longer. Make sure that you do not pour too much water into the reservoir!
1. Place the tree trunk vertically, in the center, on the retention
clips.
2. Push the tree with some force into the Christmas tree stand
so that the thorn on the bottom of the water reservoir
pierces the centre of the tree trunk.
Your tree is now positioned securely in the stand.
21

Advertisement

Chapters

Table of Contents
loading

Table of Contents