ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Frame...
1a.
Insert main module arm into 'A' slot of front leg
1
tube until you hear the 'click' sound.
2a.
Insert main support arm into 'B' slot of front leg
2
tube until you hear the 'click' sound.
3a.
Insert rear leg 'U' shaped tube onto bottom of
3
main arms until your hear the 'click' sounds from
both sides of the rear leg.
PLEASE NOTE! Ensure bend in back legs is facing outwards as per picture.
To assemble Seat...
Slide seat support arms into slot on the side of the
1a.
1
seat assembly.