Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To insert USB...
1a.
To use USB Power Cord, locate connection on the
1
bottom left hinge of product.
1b.
Insert supplied USB into connection.
1c.
Insert opposite end into an appropriate power
supply (not included with product).
To fold for Storage...
1a.
It is recommended to lower the seat to the lowest
1
height position for storage purposes.
Tray can be removed for storage if required.
1b.
2a.
Whilst standing behind product, press buttons on
2
each hinge, then pull unit backwards to fold until
legs lock in place.
To unfold the product, stand behind product,
2b.
press buttons on each hinge, then push unit
forwards to unfold until legs lock in place.
3a.
Unit can stand alone when folded.
3
Advertisement
