Sharp PC-AX Series Manual page 72

Entering and Exiting the Setup Utility
1. Turn on the computer.
2. When Press <F2> to enter System Configuration Utility appears, press F2.
3. Change the desired settings.
4. Click Exit to select the Exit menu.
5. Select one of the exit methods, and press Enter.
6. Confirm the message and press Enter again. The system restarts.
To turn off the computer when the Setup Utility is open, slide the power
switch.
Using the Setup Utility
To navigate through the different menus, you can use the following keys:
8
Space bar
8-2
Moves the cursor from one menu to another.
Moves the cursor from one item to another in a menu.
Increases the numeric value or enable/disable the item in the
sub menu.
Decreases the numeric value or changes an item to the
previous value in the sub menu.
When a sub-menu is open, this key closes the sub-menu.
Displays sub menu. Enable/disable the selected item.