Table of Contents
Advertisement
Setting the Password
1.
In the Security menu of the Setup Utility, select System Password and press
Enter.
2.
Type your password (up to eight characters), and press Enter.
3.
Type the same password again, and press Enter.
4.
Click Enable Password and press Enter.
5.
Click Exit and select Save Changes and Exit.
6.
Press Enter twice. The system restarts and asks the password you have set.
Changing the Password
1.
In the Security menu of the Setup Utility, select System Password and press
Enter.
2.
Type your current password, and press Enter.
3.
Type your new password, and press Enter.
4.
Type your new password again, and press Enter.
5.
Confirm Enable Password is checked and press Enter.
6.
Click Exit and select Save Changes and Exit.
7
7.
Press Enter twice. The system restarts.
Deleting the Password
1.
In the Security menu of the Setup Utility, select System Password and press
Enter.
2.
Type your current password, and press Enter.
3.
Without typing any characters, press Enter.
4.
Press Enter again.
5.
Click Enable Password to uncheck it and press Enter.
6.
Click Exit and select Save Changes and Exit.
7.
Press Enter twice. The system restarts.
7-2
Advertisement
Table of Contents
