Table of Contents
Advertisement
3.
Insert the card into the slot with the label face up until it locks into place. (You
do not have to power down the computer to insert/remove PC cards when using
Windows 98).
When a new card is correctly inserted, the appropriate driver is
automatically installed. If the driver is not installed correctly, you will
hear a warning beep. In this case, install the PC card driver by following
the instructions on the screen.
6
Ejecting PC Card
• Some PC cards may become hot after long use.
• Be sure to use the procedure below when ejecting a PC card.
Otherwise, the system may not work properly.
1.
In the PC Card Properties dialog box, click on the icon of the PC card you
want to eject.
2.
Click Stop.
3.
When the message prompts you to eject the card, click OK.
4.
Gently push in the PC card eject button. The PC card will be pushed out
slightly.
5.
Remove the card, and re-insert the protection card.
6.
Store the eject button in the computer.
6-2
Advertisement
Table of Contents
