Table of Contents
Advertisement
Configuration Commands
START
To
begin
the
configuration
procedures
END
To
finish
the
configuration
procedures
and
save
new
parameters in memory.
ABORT
To give up all parameters that you
have just selected.
SET
To make all parameters back to
default
settings
with *
in this
manual.
Configuration Procedures
START
Configuration
Interface Type Settings
Bar Code Type Settings
Other Options Setting
Yes
Abandon ?
No
No
Yes
Finish ?
Fig. 1 - Flow Chart of Configuration Procedures
IMPORTANT NOTICE
Each standard package contains main unit, interface
cable and user's manual. The user's manual gives you an
overall review and information about the scanner only.
SET
For those who can do the configuration by themselves,
please contact your dealer for separate configuration
All Defaults
manual.
To avoid any misuse or misunderstanding, we strongly
suggest and recommend that the configuration manual
should be used by either your dealer or your software
consultant for proper set-up and custom configuration.
INFORMATION
All materials in this manual is for your information only and
are subject to change without notice. We reserve the
rights for any changes or upgrades that have to be done.
Reproduction of this manual or any part of its contents is
not allowed without the written permission of SCSC.
SOFTWARE COPYRIGHTS
All parts of the softwares implemented in the scanners are
ABORT
protected by Copyright International Regulations.
Configuration
COPYRIGHT ©1996,SCSC.
Safety Requirements
The scanner passes and complies with the following tests
and regulations.
A) Emission: EN55022 Class B
B) Emission: EN55022 Class B which includes
1) IEC801-2 (ESD) Class B
END
2) IEC801-3 (RS) Class A
Configuration
3) IEC801-4 (EFT) Class B
C) CDRH class II and IEC class 2 laser product
D) UL, CSA and TUV
Manual P/No: SCCM - 80S-01A
Released Date: July 11, 2006
Advertisement
Table of Contents
