Replacing The Display Panel; Procedure - Dell Inspiron 24 5000 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Place the display panel on the middle frame and display-assembly base.
NOTE: Ensure the display cable has been fully threaded to the slot on the display-assembly base.
2 Route the touchscreen cable through the routing guide on the display-assembly base.
3 Slide the display-backlit cable through the slot on the display-assembly base.
4 Slide the display cable through the slot on the display-assembly base.
5 Push the display panel towards the display-assembly base.
6 Close the gap between the display panel and the middle frame.
98

Replacing the display panel

GUID-6FD32244-34F4-4843-983D-B6C14903EFC9
Released
Replacing the display panel
computer. After working inside your computer, follow the instructions in
GUID-0BB82D25-2FE9-466E-9B96-D9294835DB25
Released
49
After working inside
www.dell.com/