Removing The Base Panel; Prerequisites; Procedure - Dell Inspiron 24 5000 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the stand.
2 Remove the back cover.
3 Remove the system-board
Identifier
Status

Procedure

1 Remove the two screws (M3x5) that secure the base panel to the display-assembly base.
2 Remove the two screws (M3x5) that secure the base panel to the rear-I/O bracket.
3 Lift the base panel off the middle frame.
GUID-00149281-8B26-4782-AFBA-264C8870124E
Released
computer. After working inside your computer, follow the instructions in
GUID-9A6E5D48-5C74-4D12-B31F-3231B9CCF775
Released
shield.
GUID-591DC02A-389D-475A-BAAF-193BFE3A0AFD
Released

Removing the base panel

16
After working inside
www.dell.com/
Removing the base panel 37