Supplied Materials; Battery Installation - Extech Instruments EC100 User Manual

Introduction
Features

Supplied Materials

Battery Installation

The meter is shipped with the four (4) LR44 button batteries
removed. The user must install the batteries before the meter
can be used. Refer to accompanying diagram.
GlobalScientificSupply
www.
Congratulations on your purchase of the Extech Pen Style Water Quality instrument; the Model
EC100 measures Conductivity and Temperature. The instrument is housed in an IP65 Water-proof
enclosure for safety. This instrument is shipped fully tested and calibrated and, with proper use, will
provide years of reliable service.
 Automatic Ranging and Manual Ranging capability
 Dual Display with ATC (automatic temperature control)
 Data hold for freezing displayed readings
 Low battery indicator
 Automatic power-off for maximum battery efficiency
 Switchable temperature units of measure (C/F)
 Multi-point and one-touch calibration features
 Powered by four (4) LR44 batteries
 EC100 meter
 Four (4) LR44 button batteries
 Operation manual (hard copy, mini-disk, and on-line availability
1. Unscrew the battery compartment cover (top of
meter) in a counter-clockwise direction. Please do
not discard the black washer.
2. Install the four (4) LR44 button batteries, carefully
orienting the batteries and observing polarity.
3. Replace the battery compartment cover.
4. Please remove the batteries while the meter is not in
use for long periods.
.com
2
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
EC100-EU-EN v2.2 06/13
sales@GlobalTestSupply.com