Use As A Recirculation Hood; Mounting The Carbon Filter - KKT KOLBE CUBE User Manual

Installation
• Slightly press the tips of the rope hol-
ders and insert the rope directly.
The rope is automatically blocked.
Adjust the length of the rope accor-
ding to your individual requirements.
Note:
The ropes can only be moved while
holding down the tips of the rope
holders.
Press
• Lift the cooker hood upwards (at
least two people are recommended).
Attach the ropes to the brackets provi-
ded on the top of the cooker hood.
Note:
Adjust the rope length to your indivi-
dual needs beforehand.
Insert rope /
Pull down

9.4 Use as a recirculation hood

This appliance is factory-provided for re-
circulating air operation. For this check
inside the hood that the carbon filters
are attached on the right and left of the
motor unit.

9.5 Mounting the carbon filter

• Remove the metal grease filter.
• The carbon filter is mounted in two
parts to the right and left of the motor.
Check whether the teeth correspond
to the direction of the rotation of the
respective side.
• Turn the activated carbon filter onto
the motor housing (usually clockwise).
• Reinsert the metal filter.
(Illustrations may vary)
37