Kemper CONTROL-PLUS Operating Instructions Manual page 13

About this manual
Table of contents
Safety instructions
1 Technical data
2 Application area
3 Function
4 Installation and assembly
5 Maintenance
6 Sensor replacement
7 Spare parts
Manufacturer's address
Gebr. Kemper GmbH + Co. KG
Harkortstraße 5
57462 Olpe
Tel.: +49 2761 891-0
Web: www.kemper-olpe.de
After-sales service
Service hotline
Tel.: +49 2761 891 800
Mail: anwendungstechnik@kemper-olpe.de
About this manual
Read this manual carefully before starting
installation or operation and follow the instruc-
tions! Keep the manual in a safe place for
future reference!
Illustrations in this manual serve for a basic
understanding and may differ from the actual
system configuration.
Liability
The manufacturer assumes no warranty or
liability in the event of:
• Failure to observe the instructions in this
manual.
• Incorrect installation and/or operation.
• Unauthorised modification of the product.
14
15
19
19
19
22
22
23
© www.kemper-olpe.de - 07.2020 - K41001384G001-00 - 13/24
• Other faulty operation.eigenständiger
Intended use
The flowmeter valve CONTROL-PLUS is used
for the precise measurement of volume flow
rates and temperatures in drinking water
systems aimed at setting predefined volume
flows in accordance with the calculation base.
Any other use is considered contrary to the
intended use.
Misuse
Do not use the CONTROL-PLUS with sub-
stances other than drinking water and only
within the operating limits indicated in the
technical data.
+