Target Audience; Intended Use - PEAKnx Controlmini User Manual

Controlmini, User manual

1 Target audience

These instructions are intended to explain basic aspects of the installation, commissioning,
operation and maintenance of the Controlmini. Depending on the use phase, this manual is
aimed at other target groups:
■
Commissioning
Installation and commissioning may only be carried out by qualified electricians and
system integrators. Basic knowledge of electrical and KNX installation is assumed.
■
Operation
The operation of the commissioned panel is explained for unskilled users.
■
Repair
Under no circumstances carry out repairs to the unit yourself! If damage should occur
to the device, please contact our technical support immediately,
see chapter 9.3.

2 Intended use

Depending on the software used, the Controlmini serves as control unit for the entire KNX
installation across rooms. It thus also serves as a status display. The device must be opera-
ted within the scope of the technical data and instructions given in this manual. Keep the
device away from moisture, dirt and dust to prevent damage to the device.
The following applications belong to the intended use:
■
Use as an operating panel (input via touch) for KNX-controlled devices
■
Intercom station for compatible door stations
-
A list of all compatible door stations can be found in our FAQ:
www.peaknx.com/FAQ under the topic "compatibility".
■
Indoor operation, note the ambient conditions, see chapter 10
The following applications are not part of the intended use:
■
Operation in systems requiring special monitoring, in safety-relevant areas or in hazar-
dous areas
■
Operation under ambient conditions that do not comply with the specifications regar-
ding temperature and air humidity. These include
-
Outdoor operation
6