Inspection Manual - Combi ANGEL WAGON AW Series Instruction Manual And Inspection Manual

Combi ANGEL WAGON AW Series
This manual describes the necessary daily and periodic
inspection procedures required to mamtain safty and
comfort of the Combi ANGEL WAGON AW Series.
Make sure to carry out the daily inspection procedures daily or
weekly and the periodic inspection procedures once every 6
months correctly following the procedures in the manual.
Daily Inspection
Periodic Inspection
Depending on the inspection results, it may be necessary to replace a part.
for 5 years after the last production date.
Required Tools
*Required tools differ based on the product. It may require special tools.
* Other than escalator ramps and coin lock, the tools for AW3 series and AW4 series
are the same.
Tool name
Phillips screwdriver
No.2
10 mm wrench
Box-end wrench
8 mm
Hex key
4 mm
Hex key
2.5 mm
Precision flat blade
screwdriver
Tongue-and-groove
pliers
Tool name
19 mm wrench
Dedicated wrench
21-23 mm
Hex key
10 mm
Do not use any object or tool other than the parts already installed to the product at the time of delivery, and the
Warning
parts and tools specified. It may cause damage, malfunction or unexpected accidents.

Inspection Manual

Daily inspection is carried out by visual and
touching the Product. No tool is required.
Each part of the Product is inspected using
tools once every 6 months.
Seat Belt
l (1) l (1)
l (1)
l (1) l (1)
l (1)
l (1) l (1)
Standard (ø100)
l (2)
C a r r y o u t d a i l y i n s p e c t i o n , a n d p e r i o d i c
inspection once every 6 months to ensure safety.
If the inspections are not carried out, degradation
or damage of the Product may not be discovered,
which may lead to injuries or serious accidents.
l indicates that the tool is required; the number in parentheses
( ) indicates the required number at tool.
Part
* indicates an option
Bumper
Handle
AW4 Series
(Rear facing type)
l (1)
l (1)
Caster type
With stopper 2 or 4 antistatic
(ø100) casters (ø100)
l (1) l (2)
l (1)
8
Warning
Daily or weekly
Once every 6 months
Note: Spare parts can be stored
Umbrella
holder*
（Forward facing type)
l (1) l (1)
l (1)
For escalator ramps For escalator ramps
(ø100)
AW3 Series AW3 Series
（Forward facing type) （Forward facing type)
l (1)
l (1)
Coin lock*
AW3 Series
l (1)
l (1)
(ø125)
l (1)
l (1)