Periodic Inspection - Combi ANGEL WAGON AW Series Instruction Manual And Inspection Manual

2

Periodic Inspection

A
Checking the Casters
Inspection item
Tightness of the front casters
1
Tightness of the rear casters
2
Caster rotation
3
Wear of the caster tire
4
See the "Caster replacement procedure" on page 16 to 20 for more details.
B
Checking the Tightness of the Screws
Inspection item
Rear cover screws (x4)
5
Screws at the back of the guard
6
(x4)
Seat fixing screws (x4)
7
Hex socket bolt fixing the belt
8
cover (x1)
Umbrella holder fixing screw
9
(one for the umbrella ring and one
for the umbrella holder)*
Locking key fixing screw (x1)*
10
Coin lock fixing screws (x2)*
11
Rear cover screws (x4)
5
Inspection method
Wrench / Hex key
Wrench / Hex key
Movement/Visual check/
Touch the rotation
movement
Visual check
Inspection method
Visual check/Touch
(Phillips screwdriver)
Visual check/Touch
(Phillips screwdriver)
Visual check/Touch (hex
key)
Visual check/Touch (hex
key)
Visual check/Touch
(Phillips screwdriver)
Visual check/Touch
(Phillips screwdriver)
Visual check/Touch
(Phillips screwdriver)
Screws at the back of the guard (x4)
6
14
Validation criterion
The part is not loose.
The part is not loose.
The casters rotate smoothly.
(Any piece of string or hair caught in the
casters must be removed.)
There is no uneven wear.
Validation criterion
The part is not loose.
The part is not loose.
The part is not loose.
The part is not loose.
The part is not loose.
The part is not loose.
The part is not loose.
Seat fixing screws (x4)
7
* The illustration shows AW3(forward facing
type). Checking the reclining function of
AW4 series is the same.
Measure in case of defect
Tighten
Tighten
Replacement
Replacement
Measure in case of defect
Tighten
Tighten
Repair
Tighten
Tighten
Tighten
Tighten
Parts with * are optional.