Table of Contents
Advertisement
Timer Button
1.
During operation, press the timer button to set intervals of 2, 4 and 8 hours. A beep
will sound for each interval, and the corresponding indicator will illuminate.
2.
Press the timer button again; the timer indicator turns off and the machine will work
continuously without timer.
3.
When the time is enabled, the machine begins to count down during operation.
When the set time is up, the fan will stop working and all lights will be off.
Night Light Button
1.
During operation, touch the light control button. The light degree can be set
between soft light and standard light mode with accompanying beeps.
2.
Touch the light control button again and the LED light turns off.
Note: The light control button cannot operate when the appliance is not powered on.
Humidification Module Instructions
1.
Before use, remove the packing material from the wet curtain.
2.
Remove the humidification module and place it on a flat surface. Peel off the water
tank cover and place the wet curtain in the water tank.
3.
Add an appropriate amount of pure water to the water tank below the overflow
hole; do not exceed the overflow holes on both sides.
4.
Close the cover of the water tank and place the humidification module on the grill
of the air outlet of the air purifier.
5.
Control the product with the application from a compatible smart device.
6.
After use, keep the wet curtain dry.
Note: Because the wet curtain is affected by the environment, it will yellow slightly during
use, which is normal. It is recommended to replace the wet curtain promptly after 3 months
of use or severe yellowing.
Advertisement
Table of Contents
