Mounting The Fcs-3 - tams elektronik FCS Series Manual

English FCS modules

7.3. Mounting the FCS-3

Open the housing of the vehicle. Locate the position for the module.
Disconnect all connections from the accumulator batteries, the motor
and the mounted reed contact except for the wire to the charging
contact.
Connectsions
FCS-3
In many vehicles the resistor R7 shown in the connection diagram is
mounted into the lead-in wire to the motor. The resistor has to be
connected to the plus pole of the accumulator batteries if not yet
mounted that way. If there is no resistor, R7 is not applicable.
Page 28