tams elektronik FCS Series Manual page 22

English
Connection of the LEDs for the front light
You may connect up to two white
LEDs for the front lighting to the
module.
X2 LED6* | LED7*
R6* | R7*
X3
* Not supplied.
Caution: The LEDs for the front lighting must be operated via
!
series resistors (recommended value: 100 ). Otherwise the
connected LEDs are damaged and the circuit may not work as
intended.
Page 22
White LEDs for front lighting
Series resistors for LED6 and LED7
Voltage output (-) of the circuit
FCS modules