Honda 08B23-SJC-100 Installation Instructions Manual page 24

94. Check that all wire harnesses are routed properly
and all connectors are plugged in.
95. Reconnect the negative cable to the battery.
96. Enter the customer's radio anti-theft code, and
reset the radio station presets.
97. Reset the clock, and reset the radio station
presets.
98. Check the operation of the in-Vehicle
Entertainment System according to the Owner's
Manual provided.
99. Put the in-Vehicle Entertainment System Owner's
Manual in the glove box with the vehicle owner's
manual.
100. Reinstall all removed parts. Torque the seat belt
anchor bolts to 30 to 35 N·m (21 to 25 lbf·ft)
NOTE: Whenever the battery is disconnected, the
driver's AUTO function is disabled.
101. Start the engine. Push down on the driver's
window switch until the window is fully open.
102. Pull up on the driver's window switch fully to close
the window completely, then hold the switch for
2 seconds or more.
103. Test the window AUTO function.
24 of 24
AII 32445 (0605) © 2006 American Honda Motor Co., Inc. - All Rights Reserved.