Honda 08B23-SJC-100 Installation Instructions Manual page 21

79. Remove the left and right lens from the monitor
console, then install the monitor gasket on the
console while aligning the
gasket with the
MONITOR
CONSOLE
RIGHT LENS
MARK
80. Remove the tape that secures the 3-pin connector
to the monitor console. Connect the interior light
harness 3-pin connector and DIN cable "A"
terminal into the monitor console 3-pin connector
and monitor console terminal.
DIN CABLE "A"
TERMINAL
MONITOR
CONSOLE
TERMINAL
MONITOR
CONSOLE 3-PIN
CONNECTOR
FRONT
MONITOR
CONSOLE
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
mark of the monitor
mark of the monitor console.
LEFT LENS
MONITOR
GASKET
INTERIOR
LIGHT 3-PIN
CONNECTOR
TAPE
MONITOR
CONSOLE
HARNESS
81. While holding the monitor console, secure the
3-pin connector and the terminal to the back of
the monitor console with one cushion tape.
FRONT
3-PIN
CONNECTORS
2326290T
82. Position the monitor console on the monitor
bracket, and install two 5 x 16 mm washer-screws
and two 5 x 25 mm washer-screws. Install two
screw caps, then reinstall the left and right lens.
Do not pinch DIN cable "A" between the monitor
console and monitor bracket.
MONITOR
BRACKET
LEFT
LENS
5 x 16 mm
4917032H
WASHER
SCREW
FRONT
AII 32445 (0605)
MONITOR
CONSOLE
TERMINALS
CUSHION
TAPE
4917041H
MONITOR
CONSOLE
5 x 25 mm
WASHER
SCREW
RIGHT
LENS
SCREW
CAPS (2)
4917052H
21 of 24